SYS-ITX-N-3800/Troubleshooting
v1.0
www.winsystems.com
Page 32
Exit
10. Troubleshooting
This section provides useful tips to get the SYS-ITX-N-3800 operating. For
basic hardware installation and configuration, refer to “Installation and
Connections” on page 9. This section addresses system integration issues
in terms of BIOS setting and OS diagnostics.
10.1 BIOS settings
This section assumes that you have correctly selected and connected all
devices with the required cables before applying power. If this is in
question, inspect the connection and application of each of the following
components: 204-pin DDR3 memory, keyboard, mouse, SATA hard disk,
VGA connector, power cable of the device, and all ATX accessories. Failure
of any of these components can cause a system failure.
Menu item
Description
Exit Saving Changes
Saves all changes, exits setup, and restarts the system (this is the same
functionality as
F10
).
Exit Discarding
Changes
Exits setup without changes.
Load Setup Defaults
Loads standard default values (this is the same functionality as
F9
).
Discard Changes
Loads the original values of this boot time, not the default setup values.
Save Changes
Saves all changes on all menus, but does not restart the system.
