WinSystems SYS-ITX-N-3800, Руководство по эксплуатации продукта

Страница: 15 / 37

SYS-ITX-N-3800/Configuration
v1.0 www.winsystems.com Page 15
8.2 Power
The main power supply to the embedded computer is +12 V DC. The SYS-
ITX-N-3800 draws power through the J1 connector. See “DC Jack (J1)” on
page 15.
8.3 Connectors
8.3.1 DC Jack (J1)
This connector provides for a +12 V DC input from a power adapter.
8.3.2 Audio Jack (Line_out) (J2)
This connector provides an audio line out (Line_out) signal.
8.3.3 DisplayPort (J3)
The DisplayPort™ 1.1 connector supplies both video and high-definition
(HD) audio. See the “Audio Jack (Line_out) (J2)” on page 15 for other audio
options.
NOTE Passive DisplayPort to HDMI, DVI, or VGA adapters do NOT function with
the SYS-ITX-N-3800. An active adapter is required when converting from
DisplayPort to HDMI, DVI, or VGA video output.
8.3.4 RJ45 Connector (J4/J5)
Two Intel I210 Gigabit Ethernet controllers provide standard IEEE 1588
and 802.1AS protocol timestamping. Each Ethernet interface includes 10/
100/1000 MP/s multispeed, full, and half-duplex operation.
The pinout below describes the standard RJ45 Ethernet connectors.
Layout and Pin Reference
Pin Function Description
1 TX_D1+ Transceive Data+
2 TX_D1- Transceive Data-
3 RX_D2+ Receive Data+
4 BI_D3+ Bi-Directional Data+
5 BI_D3- Bi-Directional Data-
6 RX_D2- Receive Data-
7 BI_D4+ Bi-Directional Data+
8 BI_D4- Bi-Directional Data-
1
8