WinSystems PPM-C412 Скачать руководство пользователя страница 30

Страница: 30 / 63

PPM-C412/Configuration

v1.0

www.winsystems.com

Page 30

Keyboard

An integrated 80C42 equivalent keyboard controller supports a PS/2 keyboard which is

terminated at connector

. Optionally, a USB keyboard can be connected in addition to,

or instead of the standard PS/2 keyboard.

Mouse Interface

A PS/2 mouse port provides connection for a compatible mouse and is terminated at

connector

. Optionally, a USB mouse can be connected in addition to, or instead of

the standard PS/2 mouse.

Serial Connectors

Four independent, asynchronous serial channels are on-board. The interface is provided

at connector

, which is an 80-pin, high-density connector. WinSystems offers the

cable CBL-251-G-1-1.5 to simplify the connection. This cable is included in the cable set

CBL-SET-412-1. Configuration options for RS-232, RS-422, and RS-485 are listed

below.

All serial channels are configured as data terminal equipment (DTE). Both the send and

receive registers of each channel have a 16-byte FIFO. All serial ports have

16C550-compatible UARTs.

Independent control of transmit, receive, line status, and data set interrupts are on all

channels. Each channel is setup to provide internal diagnostics such as loopback and

echo mode on the data stream. An independent, software programmable baud rate

generator is selectable from 50 to 115.2 kbps. Individual modem handshake control

signals are supported for all channels.

RS-232 interface levels are supported on all four serial ports. The RS-232 drivers have a

charge pump to generate the plus and minus voltages so that the PPM-C412 only

re5V to operate.

All COM ports support RS-232 and can be enabled in the BIOS. COM1 and COM2 also

have RS-422/RS-485 support. RS-422/485 provides separate balanced transmit and

receive signal pairs. For RS-485 multidrop lines, one signal pair can be used for “party

line” network structures.

See “BIOS” on page 43 for further details.

COM1 and COM2 Configuration Options

1. Internal loopback
2. RS-422 mode
3. RS-422 mode with auto transmitter enable - (TX Direction = TXD)
4. RS-485 mode with auto transmitter enable - (TX Direction = TXD)

Содержание PPM-C412
































































Результаты поиска

Содержание PPM-C412

Отзывы:

Похожие инструкции для PPM-C412

Бренды по названию

Популярные бренды

WinSystems PPM-C412, Руководство по эксплуатации продукта

Результаты поиска

Содержание PPM-C412

Отзывы:

Похожие инструкции для PPM-C412

Бренды по названию

Популярные бренды