PPC65BP-1x/Setup and Installation
v1.0
www.winsystems.com
Page 15
4. Secure I/O daughter board using the two captive knurled screws.
5. Reinstall the rear cover.
7.2
Installing Memory
To install memory:
1. Remove power from the PPC65BP-1x.
2. Remove the screws securing the rear cover and remove the cover.
3. Insert memory module into J3 at an angle, and then press down so the
memory is flat.
4. Reinstall the rear cover.
7.3
Installing the Hard Drive (HDD/SDD)
To install a hard drive:
1. Remove power from the PPC65BP-1x.
J11
J3
Содержание PPC65BP-1 Series
