background image

PPC65BP-1x/BIOS Settings

v1.0

www.winsystems.com

Page 44

PCI/PCIE Configuration

Use the PCI/PCIE Configuration screen to configure the PCI, PCI-X, and PCI 

Express Settings.

Use the PCI Express configuration screen to configure the PCI Express 

Settings.

PCI Express Configuration Port 0

Enables/disables port 0. Choices: Enabled (default), Disabled.

Speed

Sets configuration PCIe speed. Choices: Auto (default), Gen1, Gen2.

PCI Express Configuration Port 1

Enables/disables port 1. Choices: Enable (default), Disable.

Speed

Sets configuration PCIe speed. Choices: Auto (default), Gen1, Gen2.

PCI Express Configuration Port 2

Enables/disables port 2. Choices: Enabled (default), Disabled.

Speed

Sets configuration PCIe Speed. Choices: Auto (default), Gen1, Gen2.

PCI Express Configuration Port 3

Enables/disables port 3. Choices: Enable (default), Disable.

Speed

Sets configuration PCIe Speed. Choices: Auto (default), Gen1, Gen2.

SATA Configuration

Use the SATA Configuration screen to configure the SATA device options.

Serial-ATA (SATA)

Enables/disables the Serial ATA. Choices: Disabled, Enabled (default).

SATA Mode

Sets SATA mode as IDE or AHCI or disables. Choices: Disabled, IDE, AHCI 

(default).

Содержание PPC65BP-1 Series
































































Отзывы: