WinSystems PPC65BP-1 Series, Руководство по эксплуатации продукта

Страница: 22 / 63

PPC65BP-1x/Setup and Installation
v1.0 www.winsystems.com Page 22
7.8 Power Up
Plug in a compatible DC power source to the DC in 12-24 V terminal block
(see “Connecting Power to J16” on page 18). The first time power is
applied, the PPC65BP-1x boots automatically bypassing the power
button. After initial startup, briefly press the power button to turn the
PPC65BP-1x on and off or press and hold it to reset. Pressing the reset
button also resets the unit.
7.9 Installing Drivers
To obtain drivers, see the WinSystems website at www.winsystems.com .
7.10 Watchdog Timer (WDT)
The PPC65BP-1x features an advanced watchdog timer (WDT) that can be
used to guard against software lockups. The timer is programmable from
1 second to 255 minutes (15,300 seconds).
NOTE Use a long timeout if the watchdog timer is enabled and booting to an
operating system.
Use the following example as a guide to programming the WDT.
7.10.1 Example Code for WDT
The following watchdog timer code example is written in C++. Use this
example as a guide to program the WDT.