PPC12-427/Configuration
v1.0
www.winsystems.com
Page 26
Part Number: 51110-0860
7.6.14 J17 - USB 3.1 Gen 1 Ports
J17 provides two USB 3.1 Gen 1 Type A ports. These ports supply 1A
maximum continuous current per channel and 5 Gbps transfer speeds.
Connector
• Dual-port stacked standard USB 3.1 Gen 1 Type A
Matching Connector
• Standard USB 3.1 Gen 1 cables and devices
7.6.15 J3 - Serial ATA 6Gbps Connector (Internal)
J3 provides a serial ATA 6 Gbps 7-pin connector for interfacing with hard
disk drives and solid state disk drives.
Connectors
• Standard 7-pin serial ATA connector
Matching Connector
• Standard serial ATA 6 Gbps signal cables
7.6.16 J500 - System Memory (Internal)
Connector J500 is a DDR3L, 204-pin, SODIMM socket, accommodating a
maximum of 8 GB error-correcting code (ECC) RAM.
7.6.17 J15/J16 - Ethernet (LAN) RJ45
Two Intel I210 Gigabit Ethernet controllers provide standard IEEE 1588
and 802.1AS protocol timestamping. Each Ethernet interface includes 10/
100/1000 Mbps multispeed, full, and half-duplex operation.
Connector
• Gigabit single-port RJ45 connector with integrated magnetics and LEDs
Warning
Do not use receptacle with center polarization key.
Warning
Do not install non-ECC RAM in this SODIMM socket.
