PPC12-427/Before You Begin
v1.0
www.winsystems.com
Page 5
1.
Before You Begin
Review the warnings in this section and the best practice
recommendations (see “Best Practices” on page 38) when using and
handling the WINSYSTEMS PPC12-427 panel PC. Following these
recommendations provides an optimal user experience and prevents
damage. Read through this document and become familiar with the
PPC12-427 before proceeding.
1.1
Warnings
Only qualified personnel should configure and install the PPC12-427.
While observing best practices, pay particular attention to the following:.
2.
Introduction
This manual provides configuration and usage information for the PPC12-
427. If you still have questions, contact Technical Support at (817) 274-
7553, Monday through Friday, between 8 AM and 5 PM Central Standard
Time (CST).
Refer to the WINSYSTEMS website at
for
other accessories (including cable drawings and pinouts) that can be used
with your PPC12-427.
3.
Functionality
The PPC12-427 is a rugged, 12.1-inch panel PC featuring the latest
generation Intel Apollo Lake-I SOC processor.
This full-featured panel PC supports three independent video displays,
one LVDS output to the 12.1-inch panel PC, two additional DisplayPorts,
dual Ethernet, two USB 3.1 Gen 1 ports, four USB 2.0 ports, eight general
purpose I/O (GPIO) lines, two channels analog-to-digital converter (ADC),
stereo audio, and a Trusted Platform Module (TPM 2.0)
FAILING TO COMPLY WITH THESE BEST PRACTICES MAY DAMAGE THE PPC12-
427 AND VOID YOUR WARRANTY.
Avoid Electrostatic Discharge (ESD)
Only handle the circuit board and other bare electronics when electrostatic
discharge (ESD) protection is in place. Having a wrist strap and a fully grounded
workstation is the minimum ESD protection required before the ESD seal on
the product bag is broken.
