14
www.winstonind.com • 800-234-5286
hold & serve drawer
Diagnosis of complaints relative to the performance of the equipment reveals the
following to be the sources (arranged from most to least frequent):
• Faulty use and care practices
• Electrical supply problems
• Equipment faults
Refer to Troubleshooting Chart on next page for
FAULT
isolation and remedies. If,
after checking for faulty
USE and CARE
practices and electrical supply problems,
the fault still exists, call a qualified servicer for diagnosis and repair of equipment
faults. If equipment is ‘IN WARRANTY,’ call Winston’s Customer Service Department
to identify those authorized to perform ‘IN WARRANTY’ service. For detailed
ZAP
Warranty information call 1-800-234-5286.
Contact the factory at 1-800-234-5286 to identify a convenient, local servicer. In
many cases, these servicers will carry parts and it will be possible to put equipment
back in service with a minimum delay.
Write down complete Model and Serial Number from Identification Tag and have
available when describing problem or parts needed.
Service parts may be purchased directly from the factory online.
Visit
www.winstonind.com
troubleshooting
