WiNRADiO G315 VHF/UHF Receiver
16
Tuning WiNRADiO G315
Manual Frequency Entry
To change frequency, simply type the new frequency into the keyboard. As
soon as you press a number or decimal point, the frequency display will
activate, waiting for a frequency to be typed. You can also click on the display
to type in a new frequency in a highlighted field. After typing the new
frequency, press
Enter
and the receiver will instantly retune. To abort, press
Escape
. To enter units, such as kHz or MHz, simply press
k
for kHz or
m
for MHz after entering the digits. Any invalid keystrokes are ignored.
Frequencies outside the receiver limits (9 kHz to 1800 MHz) will not be
accepted and the display will revert to the previous frequency.
Use the
kHz
or
MHz
buttons to select how you wish the frequency to be
displayed.
The up/down buttons under the individual digits make it possible to quickly
step up or down the frequency in the corresponding positions.
(The little slider
buttons between the up/down buttons can be used for faster adjustment.)
The
VFO
buttons make it possible to select from four different VFOs. A VFO is
a kind of frequency memory making it possible to quickly switch between
several frequencies. For example, if you tune to Frequency 1 using VFO1, and
Frequency 2 using VFO2, then you can alter between Frequency 1 and
Frequency 2 by simply clicking on the corresponding VFOs.
Содержание G315
Страница 1: ...WiNRADiO G315 VHF UHF Receiver User s Guide...
Страница 100: ...WiNRADiO G315 VHF UHF Receiver 100...
