Winnov Videum 1000 Plus, Руководство по установке аппаратного и программного обеспечения

Страница: 30 / 96

30
3. Screw the Breakout Box to the Breakout Box Mounting Bracket.
Mount the Breakout Box onto the Breakout Box Mounting
Bracket utilizing two screws. The screws are inserted from the
bottom of the Breakout Box Mounting Bracket into the
bottom of the Breakout Box.
Use a Philips screwdriver to gently tighten these screws.
4. Optionally, install additional Breakout Boxes into the Breakout
Box Mounting Bracket.
Repeat steps 1 through 3 for each Breakout Box that you want to
install into the Breakout BoxMounting Bracket at this time.
5. Attach blank Front Panel Labels to the unused locations of the
Breakout Box Mounting Bracket.
If any of the four positions of the Breakout Box Mounting
Bracket is unused, attach the blank Front Panel Label into the
recessed area of these positions to give the Breakout Box
Mounting Bracket its finished professional appearance.
You are now ready to connect the Breakout Box to your computer.
Connecting the Breakout Box to the Capture Card
To connect the external Breakout Box to the Videum Broadcaster
Capture Card, do the following:
1. Attach the A/V-Media cable to the DVI connector of the breakout
box. Carefully align the cable plug and the DVI connector on the
Breakout Box and insert the cable plug into the DVI connector.
2. Attach the A/V-Media cable to the DVI connector of the VideumII
Broadcaster Capture Card.
Connecting Video
Figure 1.20: Four breakout boxes mounted on bracket