FILTER REPLACEMENT
CAUTION:
Turn off the air clearner
and unplug the electrical cord before
performing any maintenance.
Filter Replacement
• There are two separate filters:
True HEPA Filter and Carbon Pre-Filter.
• The CHECK FILTER indicator will
signal when to replace the True HEPA
Filter. The replacement period will vary
depending on the hours of usage, air
quality, and location of the unit. However,
in most cases of normal use the filter will
need to be replaced annually.
• Change the True HEPA Filter when the
CHECK FILTER indicator is on.
• For best performance, change the
Carbon Pre-Filter every three months.
This filter should be disposed of when
changed.
Carbon Pre-Filter Replacement
1. Turn off the air cleaner and unplug the
electrical cord.
2. Remove the front panel by pulling gently
from the lower portion of the panel. Do
not force, the panel should remove easily.
3. Remove the Carbon Pre-Filter and plastic
frame by gently pulling out from the
bottom and down from the top.
4. Remove the Carbon Pre-Filter from the
plastic frame and dispose of it.
5. Remove a replacement Carbon Pre-Filter
from the resealable plastic bag and reseal
to maintain the freshness of the remaining
filter.
6. Install the Carbon Pre-Filter onto the
plastic frame by pushing against six
“hook and loop” squares on the back
of the frame. (DIAG. 6A)
7. Install the plastic frame by inserting tabs
up into the air cleaner and gently pushing
in at the bottom tab until the frame fits
into place snuggly.
8. Replace the front panel by hooking the
panel on the top of the unit. Swing the
panel in by pushing gently on each side
of the unit and then lock it into place.
9. Plug in air cleaner and press POWER
button until short “beep” sounds.
12
6A
CAUTION:
Do not wash and reuse the
True HEPA Filter or the Carbon Pre-Filter
as they will not work effectively.
