VERSION 3
05/01/2021
I
NSTALLATION AND
U
SAGE
G
UIDE
WINESP40DUPRO
Page 18
3.6
ELECTRICAL CONNECTIONS
The device must be installed in accordance with national electrical installation rules.
If the power cable is damaged, it may only be replaced by the manufacturer, its after-
sales department or a party with similar qualification.
3.6.1
CONNECTING THE OUTDOOR UNIT
Step 1: Unscrew and remove the electrical
access plate of the outdoor unit.
.
Step 2: Connect the connections housing and
the outdoor unit through the cable tie with the
4G1.5 cord (not supplied) as shown in the wiring
diagram (see section 3.6.4, p 20).
Step 3: Close the outdoor unit.
