5
3. Disconnecting Cables
A) Remove the four 5/16" screws from the cable cover, and
remove the cable cover (Figure 4).
B) Loosen the exterior nut for the 30' power/control cable
(Figure 5).
NOTE:
You may need to use the adjustable wrench
to loosen the exterior nut.
C) Depending on the tightness of the GPS cable you may
need to disconnect the GPS cable as well. To do so you
need to gently pull to disconnect the GPS cable and then
loosen the exterior GPS nut.
D) Unclip the power coupler from the internal power cable,
and unthread and remove the power/control cable
retaining nut located inside the turret (Figure 6).
WARNING:
Be careful not to lose the retaining nut inside
the turret.
Retaining nut
Power coupler
Power/
control cable
Figure 6
Exterior nut
30' Power/
control cable
Figure 5
Retaining nut
Cable
cover
Figure 4
GPS cable
5/16"
Screws
