6
RK-2000
TR-1518
MT-SM30
Operation of Secondary Receiver
When using a secondary receiver with the Pathway
®
X1
antenna, the secondary receiver does not have the full
function of the primary receiver. The primary receiver will
determine which satellite is viewed, and the secondary
receiver will need to be set up for that satellite.
If the primary receiver changes to a channel on a different
satellite, the secondary receiver will lose reception and need
to complete setup again on the new satellite.
NOTE
The secondary receiver’s program guide will only download
and display available channels from the installed satellite.
Using Outside Receptacle
If your outside TV receptacle is wired for satellite, you’ll need
to locate where that receptacle leads and connect that directly
to your satellite receiver.
If the outside TV receptacle is wired for cable, the wiring will
have to be modified for use with satellite. The coaxial cable
cannot run through any other devices or switches before the
satellite receiver.
Typically, if wired for cable, the wiring will either run through
a Winegard power supply or video switch. The easiest way
to fix this is to disconnect the cable from that device, use a
barrel connector, and connect a new cable that runs directly
to the receiver, bypassing the power supply or video switch.
Transporting
Before transporting the antenna, disconnect coax cable from
the main port.
Maintenance
The Pathway X1 antenna is designed to be maintenance free.
However, it is a good idea to periodically clean the dome with
a soft cloth, water, and dish soap
FCC Guidelines
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Temporary and Permanent
Mount Options
Winegard mount options for the Pathway X1 automatic
portable satellite TV antenna raise the antenna off of the
ground for better reception and security. These mounts are
built to withstand the harsh outdoor environment.
For more information or to purchase accessories
contact your local RV dealer or winegard.com
RK-2000 Roof Mount Kit
Antenna sold seperately.
Permanently mount your
Pathway X1 portable antenna
to your vehicle roof. No need to
buy another antenna to replace
your portable!
TR-1518 Tripod Mount
Antenna sold seperately.
Aluminum tripod elevates the
Pathway X1 portable antenna
off the ground for protection
from mud and water.
MT-SM30 Window Mount
Antenna sold seperately.
Temporary mount with
maximum flexibility. Easy one
time assembly. Includes 2
brackets for temporary side
mount opt
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
