background image

HOW TO USE THIS MANUAL 

 CUTTER 24V  86036830  05/04/11 

 1-1 

 

This manual contains the following sections: 
 

-

 

HOW TO USE THIS MANUAL 

-

 SAFETY 

-

 OPERATIONS 

-

 

MAINTENANCE

 

-

 

PARTS LIST

 

 

The HOW TO USE THIS MANUAL section will tell 
you how to find important information for ordering 
correct repair parts. 
 
Parts may be ordered from authorized dealers.

 

When placing an order for parts, the machine model 
and machine serial numbers are important. Refer to 
the MACHINE DATA box, which is filled out during 
the installation of your machine. The MACHINE 
DATA box is located on the inside of the front cover 
of this manual.   
 
 
 
 
 
 
 
 
 
 
 
The model and serial number of your machine is on 
the back panel of the machine. 

 
 
 

The SAFETY section contains important information 
regarding hazard or unsafe practices of the 
machine. Levels of hazards are identified that could 
result in product or personal injury, or severe injury 
resulting in death. 
 
The OPERATIONS section is to familiarize the 
operator with the operation and function of the 
machine. 
 
The MAINTENANCE section contains preventive 
maintenance to keep the machine and its 
components in good working condition. They are 
listed in this general order: 
 

-

 Batteries 

-

 Scrub 

Brushes 

-

 Adjusting 

Squeegee 

-

 

Scrub Deck Skirt 

-

 

Squeegee Blade/Brush Head Options 

-

 Service 

Schedule 

 

The PARTS LIST section contains assembled parts 
illustrations and corresponding parts list. The parts 
lists include a number of columns of information: 
 

 

-

 

REF – 

column refers to the reference  

number on the parts illustration. 

-

 

PART NO.

 – column lists the part 

number for the part. 

-

 

PRV NO.

 – reference number. 

-

 

QTY

 – column lists the quantity of the  

part used in that area of the machine. 

-

 

DESCRIPTION 

– column is a brief  

description of the part. 

-

 

SERIAL NO. FROM

 – column indicates 

the first machine the part number is 
applicable to. When the machine design 
has changed, this column will indicate 
serial number of applicable machine. 
The main illustration shows the most 
current design of the machine. The 
boxed illustrations show older designs. If 
column has an asterisk (*), call 
manufacturer for a serial number.  

-

     NOTES 

– column for information not 

noted by the other columns. 

 

NOTE: If a service or option kit is installed on your 
machine, be sure to keep the KIT INSTRUCTIONS 
which came with the kit. It contains replacement 
parts numbers needed for ordering future parts.

  

Содержание Saber Cutter 10052360





























































































Отзывы: