TECHNICAL SPECIFICATIONS
QUICK 98560 03/17/01
3-1
ITEM
DIMENSION/CAPACITY
Normal Power
2.8 kW
Rated Voltage
24 VDC
Rated Amperage
115 amps
Batteries
4 x 6 volt 250-250 A/H
Scrub Brush Motors
2 x .75 hp (0.56 kW)
Vacuum Motors
1 x .75 hp (0.56 kW) Standard, second motor optional
Propelling Motor
.75 hp (0.56 kW)
Mass (GVW)
1780 lbs. (810 kg)
Weight empty without batteries
810 (302 kg)
Solution Control
Gravity feed, fully variable with automatic shut off in neutral.
Solution tank capacity
30 gal. (113.5 liter)
Recovery tank capacity
30 gal. (113.5 liter)
Scrub brush
2 dia. X 16 in. (5 cm x 40.5 cm)
Scrub brush pressure
0-150 lbs. (0-68 kg) 4 automatic pressure settings
Scrub brush speed
200 rpm
Tires (QK32)
(QQK32)
12 in. (30.5 cm) pneumatic non-marking standard
12 in. (30.5 cm) Black Knobby Foam Fill
Foundation Pressure (at recommended tire psi)
35 lbs/in.²
Maximum Speed
3.7 miles/hour (5.95 km/hour)
Coverage
46,200 ft² /hour @ 3.5 mph with 2 in. overlap
Frame construction
Welded cold rolled steel and steel plated
Brakes
Self centering mechanical 8 in. (20.3 cm) disc with hand lock
parking brake.
Minimum aisle u-turn width
66 in (168 cm)
Steering
Rack and Pinon
Ramp climbing
7.5 degrees
Height
53 in. (135 cm)
Length
61 in.(155 cm) without counterweighed bumper
Length
64 in. (163 cm) with counterweighted bumper
Width without squeegee
37.75 (96 cm)
Width with squeegee
41 in (104 cm)
Width of scrub path
32 in. (81 cm)
WIDTH
HEIGHT
LENGTH
The sound pressure level at the operators ear
was measured to be 73 dBA. This was a
nearfield, broad-band measurement taken in a
typical commercial environment on a tile floor .
This appliance contains no possible source of
impact noise. The instantaneous sound
pressure level is below 63 Pa.
The weighted root mean square acceleration at
the operator’s arms was measured to be below
2.5 m/s² . This was a tri-axial, third-octive band
measurement made during normal operation on
a composite tile floor. The measurement and
related calculations were made in accordance
with ANSI S3.34-1986.
