M O T O
W A R E
M O T O W A R E
M O T O
W A R E
moto
ware
M O T O WA R E
MOTOWARE
MOTOWARE
Motoware Automation Programming Instructions |
Wireless Sun and Wind Sensor
BLINDS & AWNINGS
7. TROUBLE SHOOTING
PROBLEM
CAUSE
REMEDY
Motor extends when pressing
“UP” test button
Motor direction is incorrect
Read the motor instructions and
reverse motor direction.
Motor is not responding
Radio interference/shielding
Ensure transmitter is positioned
away from metal objects and the
motor aerial/receiver is kept straight
and away from metal also.
Sensor distance to far away
from Sensor
Move the sensor closer to the motor.
Power failure
Check the power supply to both the
motor and the sensor.
Incorrect wiring
Check if wiring is connected correctly
Pairing error
Press the large “UP” button on the
sensor to confirm pairing is correct.
Motor extends then constantly
retracts unexpectedly
Wind set to low
Increase the threshold
reduce sensitivity
Light Setting
Light sensor set too low or
high - adjust sensitivity according
to requirements
Extended awnings is covering or
shading the sensor.
Check & reposition sensor
if necessary
Motor does not react to wind
or light setting
Wind sensitivity is too high or too low
Adjust sensitivity
Time interval of strong wind is less
than 3 minutes
The wind triggering time length
must be over 3 minutes
Time interval of light status change is
less than 15 minutes
The light triggering time length
must be over 15 minutes
