remote temperature sensor with small Phillips screw-
driver, and open the battery compartment.
• Remove the batteries and reinstall them in the same
manner. Remote sensor LED indicator will fl ash show-
ing transmission of the signal.
• Remove the batteries from the main unit and reinstall
them in the same manner.
• Th e remote temperature appears on the main unit’s
display showing that transmission is being received
successfully.
If the main unit display line for the remote rain gauge
reading goes blank, press and hold the front DOWN
( ) button for 2 seconds to begin a new signal search. If
the signal still isn’t received, please make sure that:
• Th e remote rain gauge is in its proper location.
• Th e distance between main unit and remote rain
gauge is not over 100 feet (30 meters).
• Th e path between units is clear of obstacles. Shorten
the distance if necessary.
• Fresh batteries are installed correctly in both remote
rain gauge and main unit.
TRANSMISSION COLLISION
Signals from the other household devices such as wire-
less doorbells, home security systems, and entry control,
may interfere with this product or cause temporary
reception interruption. Th is is normal and will not
aff ect the general performance of the product. Th e
transmission and reception of the remote readings will
resume once the interference subsides.
CALENDAR AND CLOCK DISPLAY MODES
Date is displayed in month-date or date-month format.
Each press of the MODE button on the back panel will
toggle the clock modes between the time with seconds,
time with the day, time zone and a calendar.
MANUAL SETTINGS—CLOCK
• Press and hold MODE button for 3 seconds: the
language letters will fl ash.
• Press UP
( )
or DOWN ( ) to change fl ashing
letters.
• Aft er the fi rst value is set, press MODE button again
to move to the next value.
• Continue setting temperature in Celsius or Fahrenheit,
year, month, date, calendar format, 12 or 24 hour time
format, hour and minutes.
• Press MODE for the last time to return to the default
mode (time of day with seconds) aft er the last param-
eter is set.
TIME ZONE
• Select Time Zone setting mode by pressing MODE
button until the word “ZONE” appears to the left of
time display.
• Press and hold MODE button until fl ashing“0:00”
digits appear prompting to set the desired time zone in
30 minutes intervals.
19
20
