ALARMS—HIGH RAIN ALARM
Th e high rain alarm for the past 24 hours can be set and
displayed at any time by pressing ALARM button on
the front panel.
To set the high rain alarm,
• Press the ALARM button on the front panel until the
“ALARM HI” appears on the upper right corner of
the rainfall information line.
• Press and hold the ALARM button for 2 seconds or
until the rainfall data digits fl ash.
• Enter the rainfall amount you want to set the rainfall
alarm for using the front panel UP
( )
or
DOWN ( ).
• Press the ALARM button again to confi rm that the
high rain alarm is set. Leave in Alarm Hi mode until
alarm has sounded.
NOTE: Press and hold the MODE button on the front
panel to display the rainfall reading in inches or mm.
TIME ALARMS
Th e Wireless Rain Monitor has three available time
alarms—Weekday alarm (
W
), Single alarm (
S
) and
Ice Warning Alarm (Pre-Al).
• If Weekday alarm is activated, it will sound at the set
Weekday
Weekday
time and the alarm icon will fl ash Mondays through
Fridays.
• If Single day alarm is activated, it will sound at the set
time and the alarm icon will fl ash only for this specifi c
day and will not activate on subsequent days.
• If Ice Warning alarm is activated, in will sound at
the set time and alarm icon will fl ash if the remote
temperature for Channel One (1) reaches 35.6°F
(+2°C) and below.
NOTE: Ice Warning Alarm can be set only if one or
both of the Weekday or Single alarm are pro-
grammed.
SETTING WEEKDAY & SINGLE DAY ALARMS
• Press ALARM button once to enter into the alarms
setting mode. Th e default alarm is a Weekday alarm.
Th e abbreviation “OFF” with a letter “
W
” next
to it will be displayed if the alarm has not been set
previously.
• Press and hold the ALARM button for two seconds.
Th e hour digit will fl ash.
• Enter the hour using back panel UP
( )
or DOWN
( ).
• Press the ALARM again. Th e minute digits will fl ash.
• Enter the minutes using UP
( )
or DOWN ( ).
• Press the ALARM button again to confi rm that the
weekday alarm is set.
• Set Single day alarm in the same manner.
SETTING THE ICE WARNING ALARM
If Weekday or Single day alarm is set, the Ice Warning
Alarm can be programmed.
• Press the back panel ALARM button once to enter
into the Ice Warning Alarm setting mode. Th e abbre-
viation “OFF” with a “PRE-AL” next to it will show.
21
22
