Wincor Nixdorf TH200, Руководство программиста

Страница: 9 / 106

Programmer’s Guide
TH200
9
HT Horizontal tab
Code:
Description:
Notes:
Reference:
ASCII HT
Hex 09
Decimal 09
Moves the print position to the next horizontal tab position.

This command is ignored unless the next horizontal tab position has been set.

If the next horizontal tab position exceeds the printing area, the printer sets the printing
position to [Printing area width + 1].

Horizontal tab positions are set with ESC D .

If this command is received when the printing position is at [printing area width + 1], the
printer executes print buffer-full printing of the current line and horizontal tab processing
from the beginning of the next line.

The default setting of the horizontal tab position for the paper roll is font A (12×24) every
8th character.
ESC D
LF Print and line feed
Code:
Description:
Notes:
Reference:
ASCII LF
Hex 0A
Decimal 10
Prints the data in the print buffer and feeds one line based on the current line spacing.

This command sets the print position to the beginning of the line.
ESC 2 , ESC 3
FF
Print and return to standard mode in page mode
Code:
Description:
Notes:
Reference:
ASCII FF
Hex 0C
Decimal 12
Prints the data in the print buffer collectively and returns to standard mode in page mode,
prints the data in the print buffer and feeds one line based on the current line spacing in
standard mode.

This command is valid only in page mode.

The buffer data is deleted after being printed.

The printer does not execute paper cutting.

This command sets the print position to the beginning of the line.
ESC FF , ESC L , ESC S