Wincor Nixdorf TH200, Руководство программиста

Страница: 32 / 106

Programmer’s Guide
TH200
32
Reference:
specified to the left: nL+ nH × 256 = 65536 - N.

The print starting position moves from the current position to [N × horizontal or vertical
motion unit]

The horizontal and vertical motion units are specified by GS P .

In standard mode, the horizontal motion unit is used.

In page mode, the horizontal or vertical motion unit differs as follows, depending on the
starting point of the printing area:
①

When the starting position is set to the upper left or lower right of the
printable area using ESC T , the horizontal motion unit (x) is used.
②

When the starting position is set to the upper right or lower left of the
printable area using ESC T , the vertical motion unit (y) is used.
ESC $ , GS P
ESC a n
Select justification
Code:
Range:
Description:
Notes:
Default:
Example:
ASCII ESC a n
Hex 1B 61 n
Decimal 27 97 n
0
≤
n
≤
2, 48
≤
n
≤
50
Aligns all the data in one line to the specified position n selects the justification as follows:
n Justification
0,48 Left justification
1, 49 Centering
2, 50 Right justification

The command is enabled only when processed at the beginning of the line in standard
mode.

If this command is input in page mode, the printer performs only internal flag operations.

This command has no effect in page mode.

This command executes justification in the printing area.

This command justifies the space area according to HT, ESC $ or ESC \ .
n = 0