Getting Started
BEETLE /moPOS "Getting Started"
23
docked tablet in the POS Device HUB. The ID is read in by the Web GUI in case
the “learning mode” has been activated.
•
After completion of field contents press the [submit addition] button.
•
Then you should see a new table entry as follows:
Repeat the procedure for each participating tablet in your environment.
4.5.6.2
Adding a POS Device HUB
•
The procedure is nearly the same as for tablets. However, here you have only to
specify the two fields (no Tablet ID field):
o
Field “IP Address “
:
This is the IP address of the POS Device HUB which has been assigned by the
network via LAN cable. This is a four numbered entry where each number is
separated by a “.”
You can obtain the network address of a POS Device HUB
- when having a line display BA63 or BA66 USB or COM connected to the
desired POS Device HUB and rebooting the POS Device HUB. During boot the
assigned IP Address is shown on the display.
- additionally in the WebGUI the IP Address is also shown.
