Introduction
7 BEETLE /i8A POS System – Operating Manual 01750185706 D
Care of the B
EETLE
/i8A
Clean your B
EETLE
/i8A at regular intervals with a suitable plastic-surface
cleaner. Make sure that the power plug is disconnected, connector cables are
unplugged and that no liquid finds its way into the device. The glass surface of
your Touch Screen should be cleaned with a mild, commercially available glass
cleaning product. All pH neutral materials (pH 6 to 8) are to be used for cleaning
purposes.
Recycling the B
EETLE
/i8A
The Modular B
EETLE
/i8A System is manufactured without the use of CFCs and
CCHS and is produced mainly from reusable components and materials.
The processed plastics can, for the most part, be recycled. Even the precious
metals can be recovered, thus saving energy and costly raw materials.
Please do not stick labels onto plastic case parts. This would help us to re-use
components and material.
You can protect our environment by switching on your equipment only when it is
actually needed. If possible, even avoid the stand-by-mode as this wastes
energy, too. Also switch your equipment off when you take a longer break or
finish your work.
There are still some parts that are not reusable. Wincor Nixdorf guarantees the
environmentally safe disposal of these parts in a Recycling Center, which is
certified pursuant to ISO 9001.
Environmental protection does not begin when time comes to
dispose of the BEETLE; it begins with the manufacturer. This
product was designed according to our internal norm
“Environmental conscious product design and development”
!
WARNING
Global Vision Co., Ltd.
www.globalvision.com.vn
