Manufacturers Certification and notes
3 BEETLE /i8A POS System – Operating Manual 01750185706 D
Important notes
The Modular POS system B
EETLE
/i8A conform to the current safety standards
for data processing equipment.
If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry before
being put into service; an acclimatization period of at least two hours must
therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.
To disconnect the device from the supply voltage completely, switch off the
device and disconnect the power plug.
Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.
Never plug in or unplug data communication lines during thunderstorms.
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts, such as batteries, in an environmentally safe
manner.
The lithium battery must be disposed of in accordance with local regulations
for special waste.
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched off
immediately, the power plug disconnected and the Customer Service of
Wincor Nixdorf (WN) or your dealer must be notified.
The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs may
not only seriously jeopardize the safety of the user, but also cancel all
warranty and liability agreements.
Global Vision Co., Ltd.
www.globalvision.com.vn
