System Unit
01750185706 D BEETLE /i8A POS System – Operating Manual 26
USB (Universal Serial Bus)-A, USB 2.0
You can connect several USB peripheral devices to the USB or powered
USB interface (12V or 24V).
Only connect devices equipped with a shielded cable to the USB
interface.
RJ45 (LAN)
The system can be connected to a network (LAN) from the POS terminal
back panel.
left LED
Green
(blinking)
With running network connection
(Network cable connection ON, e.g. HUB,
Router) “Up link”
right LED
Yellow
(blinking)
during network traffic
Only connect shielded LAN cables (CAT5) as these offer a better
protection in case of interferences in a network
CRT
Connect your analog monitor to the 15-pin D-sub jack. Power for the monitor
can be tapped from either the 12V DC Jack or the 4-pin 12V LCD Out.
NOTE
NOTE
Global Vision Co., Ltd.
www.globalvision.com.vn
