
Copyright 2016, WINCO MFG., LLC
7
ASSEMBLY INSTRUCTIONS
BACK ASSEMBLY INSTRUCTIONS:
1. Lock ALL (4) casters on chair base. (See Lock/Unlock
Casters pg.8)
IMPORTANT:
•
Keep objects and persons clear of the chair before per-
forming step 2.
2. Recline mechanism should be in the upright position.
Remove any packaging that may be on the mechanism that
might prevent installation of back.
3. Hold the rear cover, on the lower rear of the back, up
exposing the mounting brackets (A). Lift the upholstered
back by its sides while aligning the mounting brackets with
the recline mechanism (B).
WARNING:
•
Keep hands clear of connection points or injury may
occur
IMPORTANT:
•
Winco recommends two people be used for step 4
•
Be careful not to tear or puncture vinyl.
PREPARATION:
1. Carefully examine your product for any damage. Inspect all components.
IF DAMAGE IS EVIDENT, REFUSE SHIPMENT, & CONTACT FREIGHT CARRIER OR WINCO IMMEDIATELY.
2. Remove all packaging material that was used for shipping.
3. Carefully remove the carton from the product.
4. Save all boxes and packaging material until after you have assembled your product and have verified that all com-
ponents are functioning properly. These material are required if it becomes necessary to return the product.
1
2
3
REAR VIEW OF CHAIR