Copyright 2016, WINCO MFG., LLC
15
OCCUPANT OPERATING INSTRUCTIONS
RECLINE WHILE IN THE SEATED POSITION:
CHAIRS WITH MANUAL ADJUSTMENT
1. While seated in the chair, place hands on each chair arm and push
back while applying pressure to the back with shoulders to activate
the mechanism into the desired position.
CHAIRS WITH INFINITE GAS SPRING ADJUSTMENT OPTION
(These models have the recline lever (A))
1. To operate the infinite back positioning, pull back on the recline lever
and adjust the upholstered back angle by pushing back with your
body until desired angle has been reached.
Release recline lever (A) when you have achieved the desired angle
to lock the back into position.
WARNING:
•
DO NOT stand or sit on the legrest
•
DO NOT place hands, legs, or feet under seat, mid-ottoman, or
legrest.
•
Stay clear of recline mechanism when operating chair.
1
2
1
2
RETURN TO THE SEATED POSITION:
CHAIRS WITH MANUAL ADJUSTMENT
1. To return the back to the full upright position, grasp chair arms with
both hands and pull body forward. (Go to step 2)
2. Press down on the legrest (A) with legs/feet until it is stored.
WARNING: Make sure all objects, hands and feet are clear
mechanims before lowering legrest!
NOTE:
Use of the recline lever is NOT required to return the legrest
to its stored position.
CHAIRS WITH INFINITE GAS SPRING ADJUSTMENT OPTION
(These models have the recline lever (A))
1. To return the back to the full upright position, pull back on either of
the recline lever (A) and lean body forward.
Release the recline lever once the back has fully returned to the
upright position.
2. Press down on the legrest (A) with legs/feet until it is stored.
NOTE:
Use of the recline lever is NOT required to return the legrest
to its stored position.
(
WARNING: Make sure all objects, hands and feet are clear
mechanims before lowering legrest!)
A
2
