Copyright 2016, WINCO MFG., LLC
3
IMPORTANT!
PLEASE READ THIS ENTIRE MANUAL BEFORE USING RECLINER. DO NOT INSTALL, MAINTAIN OR OPERATE
THIS EQUIPMENT WITHOUT READING AND FOLLOWING THIS MANUAL. OTHERWISE, SERIOUS INJURY AND/
OR DAMAGE TO PRODUCT MAY OCCUR.
THE INFORMATION CONTAINED IN THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE. PHOTOS ARE
REPRESENTATIVE OF THE PRODUCT AND MAY VARY SLIGHTLY FROM ACTUAL PRODUCTION MODELS.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!
NO PART OF THIS MANUAL MAY BE DUPLICATED IN ANY FORM WITHOUT THE PRIOR WRITTEN CONSENT OF
WINCO MFG, LLC. UNAUTHORIZED DUPLICATION MAY RESULT IN CIVIL PROSECUTION TO THE MAXIMUM
EXTENT ALLOWED BY LAW.
INTENDED USE STATEMENT
Intended Use:
Vero is a recliner for use in medical settings. It is designed to provide comfort for patients seated up
to 8 hours at a time while receiving treatments such as Dialysis, Infusion or recovery from surgical procedures where
positional adjustments are beneficial. The recliner is also suitable for general use in many medical settings such as,
but not limited to hospital room chair, waiting room chair, convalescent home chair, etc.
Winco assumes no responsibility for damage or injury caused by the improper assembly,
installation, use or maintenance of this product.
Products with the following markings are intended for commercial use only.
SYMBOLS
TYPE B APPLIED PART
FOLLOW INSTRUCTIONS
DC VOLTAGE
GENERAL WARNING SIGN
PINCH POINT
WARNING SIGN
TRENDELENBURG
SYMBOL FOR MANUFACTURER
TRANSPORTATION, STORAGE, HANDLING AND DISPOSAL INSTRUCTIONS
The product should be
transported
in factory packaging, inside an appropriate medium for the destination, i.e., air/sea cargo con-
tainers. The product should be
stored
in an environment that will inhibit rust/mold formation. Winco also recommends not leaving
the product in the factory packing in excess of 3 months. The product should always be
handled
in a manner consistent with the
user instructions, and in a manner to prevent contamination after each use. The product has many recyclable components and to
the extent practical, all effort should be used to recycle responsibly. Otherwise the product components shall be
disposed
of in
accordance with local statues.
