Copyright 2016, WINCO MFG., LLC
17
GENERAL CARE & CLEANING:
•
OCCASIONALLY lubricate pivot points on the recline mechanism with a lubricant approved by your facility.
(If equipped) Periodically position the chair back into full recline position to keep the gas cylinder lubricated.
•
Periodically inspect tightness of all screws, bolts, and nuts.
Winco furnishings are built to provide durable reliable service when properly cared for.
In general all of our products should be 1) Cleaned 2) Rinsed 3) Allowed to air dry.
It is important to note that disinfecting a product is not the same as cleaning the product. Disinfectants alone will not
provide adequate cleaning, they do not have grease or oil cutting properties to remove grime or hair and skin oils. Over
time, the appearance and feel and performance of your upholstery may diminish if not cleaned properly
CLEANING:
Remove grime, hair and body oils; Your furnishings should be cleaned with mild soap & water solution and a damp cloth
on a regular basis (especially where skin & hair make contact with upholstery). Avoid harsh detergents that could dam-
age the upholstery or finish of your recliner. If the furnishing is disinfected with bleach, it MUST be wiped off using only
clean water on a damp cloth and then be allowed to air dry. Failure to rinse upholstery with clean water can result in a
build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery
and eventually can lead to cracking. When cleaning or disinfecting the inside of a swing arm, it is important to allow the
arm to air dry before closing the arm or wipe with clean dry cloth before closing. Otherwise, the moisture between the
arm and the frame could cause the frame to rust.
GAS CYLINDER OPERATION:
DO NOT ATTEMPT TO ADJUST CYLINDER!
The Gas Cylinder is preset during manufacturing and should not be adjusted without contacting Winco Customer Service.
•
Adjusting the cylinder will not make the mechanism operate easier or more smoothly.
•
If cylinder is removed and allowed to extend it will not be able to be reinstalled without special tools.
GENERAL MAINTENANCE
