Copyright 2016, WINCO MFG., LLC
13
TRANSFER OF OCCUPANT TO CHAIR (Swing-Arm Option Only):
ATTENDANT OPERATING INSTRUCTIONS
Attendant should be positioned on the RIGHT or LEFT side of chair
WARNING: ALWAYS LOCK THE CASTERS WHEN THE OCCUPANT
ENTERS OR EXITS THE CHAIR!
1. Lock all four casters.
2. Place chair into seated or reclined position relative to the position from
which occupant is being transferred. (See pg.9)
3. Unlatch one swing-arm and place it into the 180° position.
4. Position gurney or wheel chair next to the chair on the side with the
open swing-arm.
5. Transfer patient to chair following facility safe patient handling policies.
6. Close the swing-arm and ensure latches engage properly.
(See pg. 11-Item 2.)
WARNING:
•
Do NOT leave swing-arm open after occupant is transferred to
chair.
•
When closing swing-arm, make sure occupants extremities are
clear of swing-arm.
•
When closing swing-arm, make sure any foreign objects are clear
of swing-arm travel and latch.
3
2
FOOTPLATE OPERATION:
(OPTIONAL FEATURE)
IMPORTANT:
•
Footplate MUST be used with staff assistance.
•
The footplate for the VERO model is rated for a MAXIMUM
weight capacity of 350 lbs. (158.8 kg.)
•
The footplate for the VERO XL model is rated for a
MAXIMUM weight capacity of 500 lbs (226.8 kg.)
1. TO EXTEND: Using your foot, pull out footplate as far as it will travel.
Footplate can now be used by the occupant.
2. TO STORE: Using your foot, push in on the footplate until it is
returned to the fully stored position
WARNING:
•
Footplate can be a tripping hazard if not returned to its stored
position after use.
•
ALWAYS store footplate when not in use.
1
2
