WilTec 61956, Руководство по эксплуатации, Страница: 8 / 16

© by WilTec Wildanger Technik GmbH Item 61956 Page 8
http://www.WilTec.de
http://www.aoyue.eu 12 2021 -1
http://www.teichtip.de
Connecting the operating pipe
Note: Keep the accelerator as straight as possible when connecting the blow pipes.
1. Place the device on an even surface while mounting it. Ensure that the screwing mechanism of
the clamp is positioned away from the operator.
2. Place the hose clamp (G) onto the flexible pipe and operating pipe.
3. Turn the marking on the rotating ring (D) so that it matches the throttle lever (F). Place the op-
erating pipe (E) into the flexible pipe (B) (fig. 3), then tighten it with a hose clamp (G) (fig. 4).
4. Attach the clips of the throttle valve connection (see 1, fig.5/6) to both ends of the flexible pipe
to secure the throttle valve cable.
Fig. 3 Fig. 4
Fig. 5/6
Attaching the connection pipe and the concentrator nozzle
Connect the connection pipe (H) with the air nozzle (I). Push the pipes together and turn them clockwise
so that they connect (fig. 7). Attach the pipes via the M5 screws included in the delivery.
Fig. 7