
© by WilTec Wildanger Technik GmbH
Item 61956
Page 13
12 2021
-1
Fig.
22
Fig.
23
Adjusting the carburettor
The factory settings of the carburettor allow optimal performance. If further adjustments are necessary,
contact a qualified technician with your leaf blower.
Spark plug
1.
To remove the spark plug
(B)
for cleaning or exchange, ensure that the motor is switched off
and the spark plug cooled down. Then remove the spark plug shell from the spark plug. Remove
the spark plug with the right spark plug tool. If necessary, check, clean and replace it.
2.
Spark plug distance: 0.635 mm (0.25″).
3.
Torque: 12–15 Nm. Connect the spark plug connector.
Technical specifications
Motor type
Air-cooled 2-stroke motor (1E40F-5A)
Spark plug type
AT4117 (CJ8)
Cubic capacity
(
㎤
)
42.7
Tank capacity
(ℓ)
1.2
Fuel type
Unleaded petrol
Mixing ratio
1:30
Motor power
(kW)
1.25 (1.7
hp)
Idle speed
(
r
⁄
min
)
2800 ± 200
Rotation speed with nominal output
(
r
⁄
min
)
6800
Speed limitation
None
Air flow speed
(
㎧
)
≥ 47
Air flow volume
(
㎥
⁄
s
)
≥ 0.25
Weight
(
㎏
)
8
Total dimensions
(
㎜
)
410×330×495
Noise level with 7 m distance
(dB (A))
108
Note!
Do not operate the machine due to damage from noise and vibration over a longer duration of
time (e.g., longer than half an hour).