WilTec 61956 Скачать руководство пользователя страница 4

 

© by WilTec Wildanger Technik GmbH 

 

Item 61956

 

Page 4 

 

http://www.WilTec.de

 

http://www.aoyue.eu  

 

  

 

12 2021

-1

 

http://www.teichtip.de

 

 

Warning:

 

Examine the work area before starting the device. Remove all debris and hard objects 

such as rocks, glass, wire, etc. that could ricochet, be thrown, causing injury or damage during 
operation.

 

 

Personal safety

 

 

 

Always  wear  protective  glasses  and  ear  protection  when  using  and  maintaining  the  device. 
Stirred stones or debris could otherwise be thrown in your eyes or face  and lead to serious

 

injuries and/or blindness.

 

 

Always wear safety shoes. Never use the device barefoot or wearing sandals.

 

 

Always wear a dust or face mask when working in a dusty environment.

 

 

Tie hair together that exceeds shoulder length. Secure or remove any jewellery, loose clothing, 
loose straps, ribbons, fringes, etc., as they could be caught by moving parts.

 

 

Never work with the leaf blower if you are tired or feel ill, or if you are under the influence of 
alcohol, drugs, or medicine.

 

 

Keep children, animals, and other bystanders at least 15

 

m from your work area when you start 

or use the device. Never point the air nozzle at other people or animals.

 

 

Do not operate the device without having installed the inlet cover to avoid any contact with the 
rotor.

 

 

Do not operate the device for a prolonged time. Make regular breaks.

 

 

Do not use the device when being tired or under the influence of alcohol, drugs, or medicine.

 

 

Fuel-handling safety

 

 

 

Eliminate all sources of sparks or flames (including  jobs that  may cause sparks) and do not 
smoke in areas where fuel is mixed, poured, or stored.

 

 

Mix and pour fuel in an outdoor area. Store fuel in a cool, dry, well-ventilated place. Use an 
approved, labelled container for all fuel purposes.

 

 

Do not smoke when handling fuel or operating the device.

 

 

Make sure that the device is properly installed and in good working condition.

 

 

Do not fill the fuel tank when the engine is hot or running.

 

 

Avoid spilling fuel or oil. Wipe up any fuel spills before starting the engine.

 

 

Before starting the engine, move at least 3

 

m from the fuel and the refuelling point.

 

 

Always store fuel in a container approved for flammable liquids.

 

 

Warning: 

ONLY  USE  THE  FUEL  APPROVED

  for  operation  of  this  device  as  stated  in  this 

instruction  manual.  Always  follow  instructions  stated  in  chapter  “Fuel  and  lubrication”  of  this 
instruction manual. 

ONLY

 use petrol correctly mixed with 2-stroke-motor-lubricant.

 

 

Do not operate the device without the exhaust pipe and cover being properly installed.

 

 

Do not come into contact with the hot exhaust pipe and spark plug wire.

 

 

Never operate the device in narrow or badly ventilated areas, for exhaust fumes form.

 

 

Safety of operation

 

 

 

This leaf blower is only suitable for blowing together leaves and other debris on the ground.

 

 

Operation of the device should be limited to technically experienced and properly trained per-
sons.

 

 

Before each use, inspect the device for worn, loose, missing, or damaged parts. Only operate 
the leaf blower when it is in perfect condition.

 

 

Always remove oil and fuel from the housing. Never start the device in closed rooms or build-
ings. 

Inhaling exhaust gases can be fatal!

 

 

Exhaust systems can get very hot and will remain so for some time after stopping. This also 
applies to idle use. Contact can cause burns to the skin. Think about the 

fire hazard!

 

 

To avoid static electric shock, do not wear rubber gloves or other insulated gloves during oper-
ation.

 

 

Do not place the device on any surface other than a clean, hard area while the engine is running. 
Foreign objects such as gravel, sand, dust, grass, etc. can be picked up by the air inlet and 
ejected through the exhaust opening, which can damage the device or property, or cause seri-
ous injury to bystanders or the user.

 

Содержание 61956

















Отзывы: