© by WilTec Wildanger Technik GmbH
Item 61138
Page 5
05 2021
-1
Specific safety rules
•
Do not
let comfort or familiarity with the product (gained from repeated use) replace strict ad-
herence to the nibbler safety rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
•
Always be sure that the tool is switched off and unplugged before carrying out any work
on the tool.
•
Always lead the power supply cord away from the tool towards the rear.
•
Do not touch the blade or the workpiece immediately after operation; it might be ex-
tremely hot and could burn your skin.
•
Hold the tool by the insulated gripping surfaces when performing an operation where the
cutting tool may get in contact with a hidden wiring or its own cable.
Contact with an
electrified wire will make exposed metal parts of the tool conduct the electricity and shock the
operator.
•
Hold the tool firmly with both hands.
•
Apply the machine to the workpiece only when switched on.
•
Always switch the machine off and wait until it has come to a standstill before placing it
down.
•
Never allow children to use the machine.
•
Some material contains chemicals which might be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material supplier safety data.
Warning:
Save these instructions warning: misuse or failure to follow the safety rules stated in
this instruction manual may cause serious personal injury.
Symbols
The following shows the symbols used for the tool.
Voltage in Volt
V
No load speed
n
Amperage in Ampere
A
Revolutions per minute
rpm
Frequency in Hertz
Hz
Protection class II