© by WilTec Wildanger Technik GmbH
Item 61138
Page 4
05 2021
-1
Personal safety
•
Stay alert, concentrate on what you are doing and use common sense when operating a
power tool.
Do not use the tool while tired or under the influence of drugs, alcohol or medica-
tion. A moment of inattention while operating power tools may result in serious personal injury.
•
Dress properly. Do not wear loose clothing or jewellery. Tie long hair together.
Keep your
hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
•
Avoid accidental starting. Be sure that the switch is turned off before plugging in the
device.
Carrying tools with your finger put on the switch or plugging tools in which have the
switch turned on may lead to accidents or injury.
•
Remove adjusting keys or wrenches before turning the tool on.
A wrench or a key that is
left attached to a rotating part of the tool may result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance
enable better control of the tool in unexpected situations.
•
Use safety equipment. Always wear eye protection. Dust mask, non-slip safety shoes, a
hard hat and hearing protection must be used for appropriate conditions.
Ordinary eye or
sun glasses are
no
eye protection.
Tool use and care
•
Use clamps or other ways to secure and support the workpiece to a stable platform.
Work
pieces held by hand or against your body are unstable and may lead to a loss of control.
•
Do not force the tool. Use the correct tool for your application.
The correct tool for the right
job will work better and safer at the rate which it was designed for.
•
Do not use the tool if the switch does not work properly.
Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source before making any adjustments, changing
equipment or storing the tool.
These preventive safety measures reduce the risk of starting
the tool accidentally.
•
Store idle tools out of reach of children and other untrained people.
Tools are dangerous
in the hands of untrained users.
•
Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools with
sharp cutting edges are less likely to bind and are easier to control.
•
Check for misalignment or smoothly operating moving parts, broken parts and any other
condition that may affect the operation.
If the tool is damaged, have it serviced before re-
using it. Many accidents are caused by poorly maintained tools.
•
Only use equipment that is recommended by the manufacturer for your model.
Equipment
that may be suitable for one tool might be dangerous when used on another tool.
Service
•
Tool service must be performed
only
by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in injury.
•
When servicing a tool, use only identical and original replacement parts. Follow the instructions
in the “maintenance” section of the manual. Use of unauthorised parts or failure to follow mainte-
nance instructions may create a risk of electric shock or injury.