7
8
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
enclose the hole that you have created . In some instances, it
may be possible to run the cable up into the fascia of the attic
overhang . In this circumstance, the cable will be accessible in the
attic for further routing .
Installing the Inside Antenna
Find the desired location for the Inside Antenna (Panel Antenna
option shown) . Verify that the Inside Antenna and the Outside
Antenna have the necessary separation (Minimum of 20 vertical/
horizontal feet if installed with Signal Booster set at a lower
gain, for maximum gain you may need as much as 50 feet of
separation) . For optimum results the antenna should be mounted
at least 6 feet off the ground .
Ceiling
Rafters
Inside
Antenna
In some cases, multiple Inside Antennas may be required, for
instance if you have multiple rooms with poor signal . A signal may
be split by using a splitter (sold separately) . If using more than
one Inside Antenna, a separation of at least 20 feet is necessary
between Inside Antennas . See configuration on pages 3 & 4 .
Warning:
An Inside Antenna must have a separation distance
from all persons that is at least 8 inches for the panel antenna .
Splitter Options:
3-way
(859980)
4-way
(859981)
2-way
(859957)
(sold separately)
Optional Panel
Inside Antenna
(sold separately)
