Wilo Yonos GIGA2.0-D, Инструкция по установке и эксплуатации

Страница: 167 / 424

Communication interfaces: Setting and function en
Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D 167
Name Displayed
symbols Description
Parallel operation: OFF Twin-head pump is set in parallel op-
eration.
Both pumps are
inactive in control
mode.
Parallel operation: Parallel opera-
tion Twin-head pump is set in parallel op-
eration.
Both pumps are
active in parallel in
control mode.
Parallel operation: This pump
head active Twin-head pump is set in parallel op-
eration.
This pump head is
active in control
mode. The pump partner is inactive.
Parallel operation: Pump partner
active Twin-head pump is set in parallel op-
eration.
The pump partner is
active in control
mode.
This pump head is
inactive.
In the event of an error at the pump
partner, this pump head will run.
Table 21: Active influences
12 Communication interfaces:
Setting and function
Select the following in the “Settings” menu :
Universal Display text
1.0 Settings
1.3 External interfaces
Possible selection of external interfaces:
Universal Display text
1.3.1 Relay output (SSM/SBM)
1.3.2 Control input
1.3.3 Analogue input (AI1)
1.3.4 Analogue input (AI2)
1.3.5 Wilo Net setting
NOTICE
The submenus for setting the analogue inputs are only available depending on the
selected control mode.
12.1 Menu overview of “External inter-
faces”
Universal Display text
1.0 Settings
1.3 External interfaces
1.3.1 Relay output (SSM/SBM)
1.3.2 Control input
1.3.3 Analogue input (AI1)
1.3.4 Analogue input (AI2)
1.3.5 Wilo Net setting
12.2 SSM/SBM relay application and
function
The SSM/SBM relay can be configured in the “Relay function” submenu either as a col-
lective fault signal SSM or as a collective run signal SBM.
The following table gives an overview of the possible settings: