Wilo Yonos GIGA2.0-D, Инструкция по установке и эксплуатации

Страница: 136 / 424

en Electrical connection
136 WILO SE 2022-05
NOTICE
Factory-mounted:
threaded cable gland M25 for the mains connection and threaded cable gland M20
for the cable for the differential pressure sensor/twin-head pump communication.
All other threaded cable glands M20 required must be provided by the customer.
CAUTION
In order to ensure IP55, unoccupied threaded cable glands must remain closed with
the plugs provided by the manufacturer.
• When installing the threaded cable gland, make sure that a gasket is installed be-
low the threaded cable gland.
1. Screw in threaded cable glands as required. Observe the tightening torque. See
“Electronic module tightening torques” [
} 144] table in the “Turning the display”
[ } 143] section.
2. Make sure that a gasket is fitted between the threaded cable gland and the cable
bushing.
The combination of threaded cable gland and cable bushing must be made according to
the following “Cable connections” table:
Fig. 19: Threaded cable glands/cable bushings
Connection Threaded cable gland Cable
bushing
Fig. 19,
Item
Terminal
no.
Electrical mains connection
3~380 V AC ... 3~440 V AC
1~220 V AC ... 1~240 V AC
Plastic 1 1 (Fig. 20)
SSM/SBM relay
1~220 V AC ... 1~240 V AC
12 V DC
Plastic 2.3 2.3
(Fig. 20)
Digital input 1 (only EXT.
OFF)
(24 V DC)
Metal with shielding 4, 5, 6 11 ... 12
(Fig. 20,
Fig. 21),
DI1
Bus Wilo Net
(bus communication) Metal with shielding 4, 5, 6 15 ... 17
( Fig.20,
Fig. 21)
Analogue input 1
0 ... 10 V, 2 ... 10 V,
0 ... 20 mA, 4 ... 20 mA
(differential pressure sensor
only)
Metal with shielding 4, 5, 6 1, 2, 3
(Fig. 20,
Fig. 21)
Analogue input 2
0 ... 10 V, 2 ... 10 V,
0 ... 20 mA, 4 ... 20 mA
(External setpoint sensor)
Metal with shielding 4, 5, 6 4, 5
(Fig. 20,
Fig. 21)
CIF module
(bus communication) Metal with shielding 4, 5, 6
Electrical connection of the
fan (depending on type)
assembled at the factory
(24 V DC)
7 4 (Fig. 20)
Table 9: Cable connections