44
Wilo SE 08/2020
en
• Pressing the button for the 9th time returns to the basic
setting (speed control range: high, setting/curve II).
Activating „back to
factory setting“
The factory setting is activated by pressing and holding
the operating button whilst switching off the pump.
• Press and hold the operating button for at
least 4 seconds.
All LEDs flash for 1 second.
The LEDs for the last setting flash for 1 second.
When the pump is switched on again, the pump runs
using the factory settings (delivery condition).
8 Decommissioning
Shutting down
the pump
Shut down the pump immediately if the connecting
cable or other electrical components are damaged.
• Disconnect the pump from the power supply.
• Contact Wilo customer service or a specialist technician.
7
Speed control range: medium
I
8
Speed control range: high
III
9
Speed control range: high
II
LED display
Control mode
Setting/curve
NOTICE
All settings/displays are retained if the power
supply is interrupted.
Содержание Wilo-PARA SCA Series
Страница 2: ...Fig 1 11 1 2 3 4 5 Para SCA 6 8 9 10 7...
Страница 3: ...Fig 2 Fig 3 a b Fig 4 Fig 5a Fig 5b 1 2 PE N L...
Страница 4: ...Fig 5c Fig 5d Fig 5e Fig 5f Fig 6...
Страница 6: ......
