Wilo Wilo-CronoBloc-BL, Инструкция по установке и эксплуатации

Страница: 24 / 30

English
Installation and operating instructions Wilo-IL/-DL/-BL 39
Spare parts table Allocation of assemblies, see Fig. 1/2/3
12 Disposal
Proper disposal and recycling of this product prevents damage to the
environment and risks to personal health.
Proper disposal requires the drainage and cleaning and the disman-
tling of the pump unit.
Lubricants must be collected. The pump components are to be sepa-
rated according to material (metal, plastic, electronics).
1. Use public or private disposal organisations when disposing of all
or part of the product.
2. For more information on proper disposal, please contact your local
council or waste disposal office or the supplier from whom you
obtained the product.
Subject to change without prior notice!
No. Part Details No. Part Details
1 Exchange set
(complete)
1.1 Impeller (set) with: 1.5 Coupling (complete)
1.11 Nut 2 Motor
1.12 Spring washer 3 Pump housing (set)
with:
1.13 Impeller 1.14 O-ring
1.14 O-ring 3.1 Pump housing
(IL, DL, BL)
1.2 Mechanical shaft seal
(set) with: 3.2 Stopper for pressure
measurement connec-
tions
1.11 Nut 3.3 Switchover valve ≤ DN 80
(only DL pumps)
1.12 Spring washer 3.4 Switchover valve ≥ DN 100
(only DL pumps)
1.14 O-ring 4 Fastening screws for
lantern/pump housing
1.21 Mechanical seal (com-
plete) 5 Fastening screws for
motor/lantern
1.3 Lantern (set) with: 6 Nut for motor/lantern
fixing
1.11 Nut 7 Washer for motor/lan-
tern fixing
1.12 Spring washer 8 Adapter ring
(only BL pumps)
1.14 O-ring 9 Pump supporting feet
for motor sizes
≤ 4 kW
(only BL pumps)
1.31 Bleed valve 10 Forked spacer (Fig. 15)
1.32 Coupling protection
1.33 Lantern
1.4 Shaft (set) with:
1.11 Nut
1.12 Spring washer
1.14 O-ring
1.41 Shaft compl.
1.42 Snap ring