Wilo Stratos ECO Series, Инструкция по установке и эксплуатации

Страница: 5 / 36

Installation and operating instructions Wilo-Stratos ECO 3
English
2.2 Qualified personnel
The personnel installing the pump must have the appropriate qualification for
this work.
2.3 Risks incurred by failure to comply with the safety precautions
Failure to comply with the safety precautions could result in personal injury or
damage to the pump or installation. Failure to comply with the safety
precautions could also invalidate warranty and/or damage claims.
In particular, failure to comply with these safety precautions could increase the
possibility of the following risks:
• the failure of important parts of the pump or installation
• personal injury due to electrical and mechanical causes
• material damage
2.4 Safety precautions for the operator
Existing regulations for the prevention of accidents must be observed. National
Electrical Codes, local codes and regulations must be followed.
2.5 Safety precautions for inspection and installation
The operator must ensure that all inspection and installation work is carried out
by authorised and qualified specialists who have carefully reviewed these
instructions.
Work on the pump/unit must be carried out only with the pump disconnected
(locked out) from the electrical supply and at complete standstill.
2.6 Unauthorised alterations and manufacture of spare parts
Alterations to the pump or installation may only be carried out with the
manufacturer's consent.
The use of original spare parts and accessories authorized by the manufacturer
will ensure safety. The use of any other parts may invalidate claims involving the
liability of the manufacturer for any consequences.
2.7 Improper use
The operational safety of the pump or installation supplied can only be
guaranteed if it is used in accordance with paragraph 4 of the operating
instructions. The limits given in the catalogue or data sheet must under no
circumstances be exceeded.