Transportation and storage
en
Installation and operating instructions Wilo-Flumen OPTI-TR 20-1, 22, 28-1, 30-1, 40-1, Wilo-Flumen EXCEL-TRE 20, 30, 40
49
2.12
Operator responsibilities
ƒ
Provide installation and operating instructions in a language which the personnel can
understand.
ƒ
Make sure that the personnel have received the required training for the specified
work.
ƒ
Provide protective equipment. Ensure that the protective equipment is worn by per-
sonnel.
ƒ
Ensure that safety and information signs mounted on the device are always legible.
ƒ
Train the personnel on how the system operates.
ƒ
Fit dangerous components within the system with an on-site guard.
ƒ
Demarcate and cordon off the working area.
ƒ
Measure the noise level. At noise levels of 85 dB(A) and over, wear hearing protec-
tion. Demarcate the working area!
3
Transportation and storage
3.1
Delivery
ƒ
After receiving the shipment, check it immediately for defects (damage, complete-
ness).
ƒ
Defects must be noted on the freight documentation.
ƒ
Defects must be notified to the transport company or the manufacturer on the day
of receipt of shipment.
ƒ
Subsequently notified defects can no longer be asserted.
3.2
Transport
NOTICE
Transporting mixers without attachment points
Mixers for ground and wall fixation have no in-built frame and therefore no attach-
ment point. Transport the mixer on the pallet to the installation site. Have one or
two persons position the mixer at the installation site. Bear in mind the weight of the
mixer!
Fig. 1:
Attachment point
ƒ
Wear protective equipment! Observe the work regulations.
–
Protective gloves: 4X42C (uvex C500)
–
Safety shoes: Protection class S1 (uvex 1 sport S1)
ƒ
Attach the mixer to the attachment point.
ƒ
Protect the connection cable against water ingress.
ƒ
Only remove the outer packaging at the site of use to ensure that the mixer is not
damaged during transport.
ƒ
Use tear-proof plastic sacks of sufficient size to package used mixers for transport
in a leak-proof manner.
