Wilo Comfort-Vario COR-1***-GE Series, Инструкция по установке и эксплуатации

Страница: 21 / 52

English
Installation and operating instructions Wilo-SiBoost Smart 1, Wilo-Comfort-Vario COR-1...-GE, Wilo-Comfort-Vario COR/T-1...-GE 3
Fig. 5a Low-water cut-out switchgear (WMS)
kit mounted on drain connection (Helix VE;
MVIE)
Fig. 5b Low-water cut-out switchgear (WMS)
kit mounted on inlet-side pipework (MHIE;
MVISE)
Fig. 5c Electrical connection options/WMS
switching logic
14-a WMS kit
14-1 PS3 pressure switch
14-2 Plug (PS3-Nxx or PS3-4xx versions)
14-2a PS3-4xx two-core connection cable,
normally-closed function (opens when
pressure drops)
14-2b PS3-Nxx three-core connection cable,
changeover contact function
14-3 Pressure gauge
14-4 Distributor/fitting
14-5 Air vent valve
14-6 Stop valve
14-b WMS connection kit
14-7 Screwed connection
14-8 Fitting
14-9 Pump drainage screw
14-10 O-ring seals
14-11 Thread adapter
14-12 Inlet-side pipework
14-13 Shut-off valve
BN Brown
BU Blue
BK Black
Connection in control device (see supplied
terminal diagram)
Fig. 6a Example of a direct connection
(hydraulic diagram)
Fig. 6b Example of an indirect connection
(hydraulic diagram)
20 SiBoost Smart1/COR-1… system
21 Consumer connections upstream of the
system
22 Diaphragm pressure vessel (accessory) on the
inlet side with bypass
23 Diaphragm pressure vessel (accessory) on the
discharge side with bypass
24 Consumer connections downstream of the
system
25 Infeed connection for flushing the system
26 Drainage connection for flushing the system
27 Non-pressurised break tank (accessory) on
the inlet side
28 Flushing apparatus for inlet connection of the
break tank
29 Bypass for inspection/maintenance only (not
permanently installed)
Fig. 8 Installation example
16 Main switch (MS) (optional)
30 Compensator with extension limiters
(accessory)
31 Flexible connection pipe (accessory)
32 Floor fixation with structure-borne noise
insulation (provided by the customer)
33 Fixation of pipes, e.g. with pipe clamp
(provided by the customer)
34 Screw the vibration absorbers (included in
scope of delivery) into the threaded inserts
provided and secure them with counter nuts
BW Bend angle for flexible connection pipe
RB Bend radius for flexible connection pipe