Wilo 2197102, Инструкция по установке и эксплуатации

Страница: 24 / 100

en General information
24 WILO SE 2020-07
1 General information
1.1 About these instructions
These installation and operating instructions are an integral part of the product. Read
these instructions before commencing work and keep them in an accessible place at
all times. Strict adherence to these instructions is a requirement for intended use and
correctly operating the product. All specifications and markings on the product must
be observed. These installation and operating instructions correspond to the relevant
version of the device and the underlying safety standards that apply at the time of
going to print.
The language of the original operating instructions is German. All other languages of
these instructions are translations of the original operating instructions.
2 Safety
These operating instructions contain basic information which must be adhered to
during installation and operation. For this reason, these installation and operating in-
structions must, without fail, be read by the installer and the responsible qualified
personnel/operator before installation and commissioning.
Not only the general safety instructions listed in the main “Safety” section must be
adhered to, but also the special safety instructions marked with danger symbols as
described below.
2.1 Identification of safety instructions
These installation and operating instructions set out safety instructions for prevent-
ing personal injury and damage to property, which are displayed in different ways:
ƒ
Safety instructions relating to personal injury start with a signal word and are pre-
ceded by a corresponding symbol .
ƒ
Safety instructions relating to property damage start with a signal word and are
displayed
without a symbol.
Signal words
ƒ
Danger!
Failure to observe safety instructions will result in serious injury or death!
ƒ
Warning!
Failure to follow instructions can lead to (serious) injury!
ƒ
Caution!
Failure to follow instructions can lead to property damage and possible total loss.
ƒ
Notice!
Useful information on handling the product
Symbols
These instructions use the following symbols: