Rev. 1/2019
Installation & Operation Manual
Aquafount
®
360° Washfountain
WAF-5406-PSL-FT / WAF-5408-PSL-FT
Willoughby Industries, Inc.
TOLL FREE
(800) 428-4065
● LOCAL
(317) 875-0830
● FAX
(317) 875-0837
Page 10
www.willoughby-ind.com
Parts supplied:
• Washfountain wash basin
• Pedestal base assembly
• Actuator housing assembly
• 1/4"-20 X 1/2" security screws
Caution: Do not leave bowl on the pedestal
unsupported, as it may fall and cause
damage or personal injury.
1�) With the help of an assistant, place the basin on top of the pedestal aligning the threaded
inserts in the bottom with the holes in the top support ring� Secure with security screws�
Note:
BE SURE to use the security screws included with the washfountain. Using longer
screws than those provided can damage the solid surface basin.
2�) Place the head assembly over the center of the basin riser aligning the holes with threaded
inserts� Secure with security screws, but
DO NOT OVERTIGHTEN
; this can damage the
solid surface basin and actuator housing�
3�)
The wash basin is ready for plumbing installation�
Step 2: Valving and Basin Assembly
Installation Instructions (cont.)
(Similar PSL-FT WAF 6-station unit shown)
