Willoughby WAF-5406-PSL-FT Series Скачать руководство пользователя

Страница: 28 / 28

Rev. 1/2019

Installation & Operation Manual

Aquafount

360° Washfountain

WAF-5406-PSL-FT / WAF-5408-PSL-FT

Willoughby Industries, Inc.

TOLL FREE

(800) 428-4065

● LOCAL

(317) 875-0830

● FAX

(317) 875-0837

Page 28

www.willoughby-ind.com

Solid surface products are a homogenous blend of resins, mineral filler and colorant

manufactured for panels, molded and/or shaped products and components� Solid surface

products provide a luxurious appearance with the durability of stain proof, impact resistant,

burn resistant material with the ease of maintenance and cleaning�

Willoughby Industries, Inc� warrants to commercial and institutional purchasers only that each

unit will be free from defects in workmanship and materials under normal use and service upon

the following terms and conditions� The period during which components are warranted is as follows:

1� Solid surface components are warranted for 2 years from date of shipment�

2� All other components warranted for 1 year from date of shipment�

This warranty does not cover installation or any other labor charges and does not apply to any

components damaged by accident, abuse, improper installation or improper maintenance� This

warranty does not cover any installation that did not comply with national, state and local building,

plumbing or electrical codes� The warranty is limited to replacing or repairing at manufacturer's option,

transportation charges prepaid by the purchaser, any component or part which upon our inspection

shall be deemed as defective within the limitations of this warranty� The replacement or repair of

defective units as stated in this warranty shall constitute the sole remedy of the purchaser and the

sole liability of Willoughby Industries, Inc� Willoughby Industries, Inc� shall not otherwise be liable

under any indirect damages caused by defects in the repair or replacement thereof�

This warranty only extends to commercial and industrial purchasers and does not extend to any

others, including consumer customers of commercial institutional purchasers� This warranty is in

lieu of all other warranties, expressed or implied, including implied warranty of merchantability or

fitness for a particular purpose or otherwise.

Warranty

Содержание WAF-5406-PSL-FT Series





























Результаты поиска

Содержание WAF-5406-PSL-FT Series

Отзывы:

Похожие инструкции для WAF-5406-PSL-FT Series

Бренды по названию

Популярные бренды

Willoughby WAF-5406-PSL-FT Series, Руководство по установке и эксплуатации

Результаты поиска

Содержание WAF-5406-PSL-FT Series

Отзывы:

Похожие инструкции для WAF-5406-PSL-FT Series

Бренды по названию

Популярные бренды