RHAPSODY III DIGITAL PIANO
WILLIAMSPIANOS.COM
3
ASSEMBLY INSTRUCTIONS
STEP 1 - Place the four Cylindrical Nuts A (M6 Nut) into the holes in the Stand
Legs, with the screwdriver slot facing out. Use a screwdriver to align
the threads in the nuts with the openings on the bottom of the
Stand Legs.
ASSEMBLY PARTS LIST
STEP 2 - Place the dowels in the feet into the appropriate holes in the bottom
of the Stand Legs. Make sure that the feet are facing away from
the back panel bracket as shown below. Thread two Foot Bolts B
(M6X55) through the foot and into the cylindrical washers, rotating
the washer to align if needed. Firmly tighten & repeat for the other
side.
