RHAPSODY III DIGITAL PIANO
WILLIAMSPIANOS.COM
13
SPLIT MODE
Split Mode allows the keyboard to be divided
into two sections so that different voices may be
played with the left and right hands. The volume
may be independently adjusted for each voice,
the Split Point (the highest note played with the
left hand) may be adjusted and the Split Voice
may be changed as desired.
To Enter Split Mode
Press the [SPLIT] button. The Split (left hand)
voice will be the last Split Voice used and the
Split Point will be B2 (just below middle C.)
To Change the Lower Split Volume
To adjust the lower split volume, press and hold
the Split button and press the Value + and Value
– buttons.
Change the Split (Left Hand) Voice
Press and hold the Split button while depressing
the desired Voice Select button.
Change the Main (Right Hand) Voice
Simply press another Voice Select button.
Change the Split Point
Hold the Split button and then press a key on
the keyboard to determine the split point. This
key will be the top key of the lower split.
To Change the Split (Left Hand) Octave
When Split mode is on, changing the octave
adjusts the lower split. Press and hold the
Octave button then press the Value + or Value –
button.
To Turn Off Split Mode
Press the Split button. The Split Button LED will
switch off to show that it is disabled.
DEMO SONGS
The Rhapsody III comes with 12 demo songs
as well as the ability for you to play and record
your own song. When you record your own
song the recording will be retained until you
either record a new song or if you reset the
Rhapsody III back to factory settings.
To Play A Demo Song
Simply press the Demo button to have the
Rhapsody play a song on your currently
selected voice. Pressing the Voice buttons while
a demo song is active will play a song on the
newly selected voice.
Metronome Function
Press the Metronome button to turn on the
metronome. The LED will light. You will hear
the click in headphones or speakers. Press the
Metronome button again to exit metronome
function. The LED will turn off.
To Change Metronome Time Signature
1. Press and hold the Metronome button, then
press and hold one of the 10-key buttons on
the right side of the panel. For example, for
3/4 meter hold the Metronome and 3 (Organ)
buttons for two seconds. See the chart below
for details.
PRESS AND HOLD
RESULT
1
None
2
2/4 or 2/8
3
3/4 or 3/8
4
4/4 or 4/8
5
5/4 or 5/8
6
6/4 or 6/8
7
7/4 or 7/8
8
Quarter (x/4) or
Eighth (x/8) meter
9
9/4 or 9/8
10
None
