background image

15

WARRANTY

7.  Equipment manufactured to the customers’ own 

design, Williams Refrigeration will not be liable 

for any defect, non performance or improper 

operation of the equipment arising from any 

drawing design or specification supplied by the 

customer, their representative or agent.

8.  Second hand equipment.
9.  The customer uses or installs the equipment in 

such a way that it exceeds its design envelope or 

operates the equipment at control parameters 

other than those provided as standard factory 

settings.

10. The customer fails to observe commonly 

accepted operating practices.

11. The customer has not properly cleaned or 

maintained the equipment or carried out 

necessary servicing, including cleaning of the 

condenser, in accordance with instructions, 

literature or directions issued by Williams 

Refrigeration. (Operating Instructions are 

supplied with all equipment but also available at 

www.williams-refrigeration.co.uk).

12. Equipment fails through improper installation by 

others, misuse, abuse, accidental damage, power 

loss or fluctuations, fire, flooding or acts of god.

13. Any third party item(s) connected to the 

equipment that may affect performance.

14. The customer permits persons other than 

those authorised by Williams Refrigeration to 

perform or affect repairs or adjustments to the 

equipment.

15. If authorised representatives of Williams 

Refrigeration are denied full and free rights of 

access to the equipment for inspection during 

normal business hours as previously stated.

16. If Repairs are made using spare parts 

or replacement items not supplied or 

preauthorised by Williams Refrigeration.

17. The initial equipment supply date shall apply for 

warranty validity for the subsequent supply of 

replacement of parts or products.

EXTENDED WARRANTY 

Extended Warranty offers the opportunity to protect 

your equipment (subject to conditions outlined) for 

an additional period of up to 5 years inclusive of 

original warranty periods.
Should you require Extended Warranty, state on 

your order or notify the Dealer or Williams Sales 

Manager at the time of purchase and they will be 

able to arrange it for you.
To ensure your Extended Warranty Policy remains 

valid, at least one maintenance / service visit per 

year must take place in years 2, 3, 4 and 5.

For further information or clarification please 

call 01553 817000 or email to 

 

[email protected] or write to 

Williams Refrigeration, Bryggen Road, King’s 

Lynn, Norfolk, PE30 2HZ

Содержание Medi+ LWMP620

















Отзывы: